J.E. Adams 29050VR Vault-Ready Ultra Series 3-Motor Commercial Vacuum with Turbo Towel

Car Wash Vacuum and Air Dryer for use with Coin Vault

The J.E. Adams 29050VR Ultra Series Vacuum and Dryer allows customers to thoroughly clean their carpet and upholstery while also drying exterior surfaces after their car wash. Spot-free drying without having to contact the car surface with abrasive towels! This steel body vacuum uses three 1.6 horsepower motors and is topped with a colorful lighted dome. This model accepts bills, coins, and tokens. Use this unit with a buried coin vault.

Specifications and Features:

• Stainless steel tank
  
• Lighted dome - available in red, blue, yellow, dark green, or white
  
• (3) 120 volt motors (Replacement Item #8055EM) - requires 30 amp service
  
• 2" threaded nipple and vault tube cover included
  
• Maximum 210 CFM; 708 air watts
  
• 3 lighted push buttons for the following functions: 2 motor vacuum, 3 motor turbo vacuum, and hot air dryer
  
• Ability to charge different price for each function
  
• Turbo Towel is the first and only blower on the market with heated air
  
• Turbo Towel uses (1) 120 Volt high-performance blower motor
  
• Use Turbo Towel to quickly dry off the exterior of your car
  
• Blast water out of cracks and crevices
  
• Dry floor mats and carpets in a matter of minutes
  
• Great for drying motorcycles, chrome wheels, mirrors, and engine compartments
  
• Heating element will engage when ambient temperature is below 79 degrees to provide a streak and spot free finish
  
• Thermostatically controlled heating element
  
• Nozzle velocity exceeds 200+ miles per hour
  
• Prevent scratches and marks caused by standard hand towel and chamois drying
  
• Eliminates storage and transportation of wet towels
  
• Turbo Towel is Eco-Friendly!! Minimize landfill waste from purchased and non recyclable products!
  
• Includes a 2" x 30' high temperature hose for Turbo Towel (Item #2036-2) and nozzle (Item #2058-5)
  
• Includes a 2" x 15' vacuum hose, swivel cuff and nozzle (15', 25' and 50' also available in 1 1/2" or 2")
  
• Large dixmor digital display timer - scrolls messages, counts down time, scrolls price of services (Replacement Item #8000-15)
• Digital display can be easily programmed with optional remote control (Item #8000-30)Coin box holds 650 quarters or $165.00 (Replacement Item #29000-52W-2 for unit with Plug Locks or Replacement Item #29000-52W for unit with Screw Locks)
• Imonex electronic coin acceptor takes U.S. $1.00 coins, U.S. quarters, 1.073 and 0.984 tokens (Replacement Item #8149-92)
• This coin mech accepts tokens as an equal value to its like coin only (quarter = 0.984 token & dollar coin = 1.073 token) and is NOT programmable. For example, if you set the unit to vend for $1.00, with this coin mech, that would require (4) quarters or (4) 0.984 tokens to start. If you want 1 token to equal multiple quarters you need to upgrade to a programmable coin mech. See Item # 8131-33
• Mars bill acceptor takes $1.00 and $5.00 bills (Replacement Item #8130-6)
• Comes with 7 Medeco locks (3 for the control door, 1 for an internal bill acceptor locking box, 1 for an internal coin acceptor locking box, and 2 for the Turbo Towel compartment) (Replacement Item #22001-6A for external locks & Item # 8958-3 for internal locks) Includes a 3/8 Allen Wrench for unlocking doors. Item #29000-ALLEN
  
• Weight: 278 lbs.

Vault-Ready Information:

• This vacuum unit stores coins in a vault that is buried in the ground, concrete, or pavement immediately below the meter. A vault tube cover and a 2" threaded nipple are included to direct the coins into the vault. Vault tube NOT included.