J.E. Adams 29051VR Vault-Ready Ultra Series 3-Motor Vacuum with Turbo Towel - No Bill Acceptor

Coin and Token Vacuum with Hot Air Dryer for use with a Coin Vault

The J.E. Adams 29051VR Ultra Series Vacuum and Dryer allows customers to thoroughly clean their carpet and upholstery while also drying exterior surfaces after their car wash. Spot-free drying without having to contact the car surface with abrasive towels! This steel body vacuum uses three 1.6 horsepower motors and is topped with a colorful lighted dome. This model accepts coins and tokens and is designed for use with a security vault buried near the unit.

Specifications and Features:

• Stainless steel tank
  
• Lighted dome - available in red, blue, yellow, dark green, or white
  
• (3) 120 volt motors (Replacement Item #8055EM) - requires 30 amp service
  
• 2" threaded nipple and a vault tube cover included (for attaching to vault)
  
• Maximum 210 CFM; 708 air watts
  
• 3 lighted push buttons for the following functions: 2 motor vacuum, 3 motor turbo vacuum, and hot air dryer
• Ability to charge different price for each function
  
• Turbo Towel is the first and only blower on the market with heated air
  
• Turbo Towel uses (1) 120 Volt high-performance blower motor
  
• Use Turbo Towel to quickly dry off the exterior of your car
  
• Blast water out of cracks and crevices
  
• Dry floor mats and carpets in a matter of minutes
  
• Great for drying motorcycles, chrome wheels, mirrors, and engine compartments
  
• Heating element will engage when ambient temperature is below 79 degrees to provide a streak and spot free finish
  
• Thermostatically controlled heating element
  
• Nozzle velocity exceeds 200+ miles per hour
  
• Prevent scratches and marks caused by standard hand towel and chamois drying
  
• Eliminates storage and transportation of wet towels
  
• Turbo Towel is Eco-Friendly!! Minimize landfill waste from purchased and non recyclable products!
• Includes a 2" x 30' high temperature hose for Turbo Towel (Item #2036-2) and nozzle (Item #2058-5)
• Includes a 2" x 15' vacuum hose, swivel cuff and nozzle (15', 25' and 50' also available in 1 1/2" or 2")
• Large dixmor digital display timer - scrolls messages, counts down time, scrolls price of services (Replacement Item #8000-15)
• Digital display can be easily programmed with optional remote control (Item #8000-30)
• Coin box holds 650 quarters or $165.00 (Replacement Item #29000-52W-2 for unit with Plug Locks or Replacement Item #29000-52W for unit with Screw Locks)
• Imonex electronic coin acceptor takes U.S. $1.00 coins, U.S. quarters, 1.073 and 0.984 tokens (Replacement Item #8149-92)
• This coin mech accepts tokens as an equal value to its like coin only (quarter = 0.984 token & dollar coin = 1.073 token) and is NOT programmable. For example, if you set the unit to vend for $1.00, with this coin mech, that would require (4) quarters or (4) 0.984 tokens to start. If you want 1 token to equal multiple quarters you need to upgrade to a programmable coin mech. See Item # 8131-33
• Comes with 6 Medeco locks (3 for the control door, 1 for an internal coin acceptor locking box, and 2 for the Turbo Towel compartment) (Replacement Item #22001-6A for external locks & Item # 8958-3 for internal locks) Includes a 3/8 Allen Wrench for unlocking doors. Item #29000-ALLEN
• Weight: 278 lbs.

Vault-Ready Information:

• This vacuum unit stores coins in a vault that is buried in the ground, concrete, or pavement immediately below the meter. A vault tube cover and a 2" threaded nipple are included to direct the coins into the vault. Vault tube NOT included.